|
NEXRAY CARBONDRY |
|
Autoclave
carbon parts... |
Autoclave carbon
parts is completely different from resin bonded carbon
parts.
Each carbon parts is molded in the vacuum and high temperature
autoclave, and resin moisture is removed.
This advanced process makes each carbon fiber connect
firmly, and therefore each parts becomes light weight
and high stiffness.
In top motor sports categories such as Formula One and
MotoGP, autoclave carbon parts are used in various components.
On the other hand, autoclave carbon itself is permeable.
In motor sports scenes, autoclave carbon parts are
used in a short time and there is no need to be coated
on the surface. But when using on the street, it needs
to consider the effect under various ways of long-term
usage such as temperature, rain, UV radiation and
etc.
To cover this disadvantage, many autoclave carbon
parts are coated several times and as a result, coating
thickness gets thicker and parts itself puts on extra
weight, then kills autoclave carbon characteristics.
Also too much coating loses "beautility" which autoclave
carbon has.
|
|
Then
what is good about
NEXRAY autoclave carbon parts... |
|
|
|
|
|
|
|
|
|
|
All Rights Reserved, Copyright (C) ACTIVE co., LTD |
|
|